5.DC-3GHZ 2W N Connector
Frequency Range:  DC-3
Input Power Average:  0.5W                                            
Attenuation:1-30(dB) optional                    
Attenuation Precision:  DC-3GHz:1-30 (dB)  optional
VSWR Maximum:   1.15(DC-3GHz)   
Impedance: 50Ω
Connector:   N
Weight:    56g

6.2W BNC Attenuator
Frequency Range:  DC-3
Input Power Average:  2W                                            
Attenuation:1-30(dB)optional                        
VSWR Maximum:   1.15(DC-3GHz)   
Impedance: 50Ω
Connector:   BNC
Weight:    30g

7.5W SMA Attenutor
Frequency Range:  DC-3GHz
Input Power Average:  5W                                            
Attenuation:1-30(dB)optional                     
VSWR Maximum:   1.15(DC-3GHz)   
Impedance: 50Ω
Connector:   SMA
Weight:    56g

8.CAT-H
DC-6GHZ 1db  50ohm SMA-Male to SMA-Female 2w  12356102030dB

step Attenuators:
I.Product Description
     Step Attenuators can be used to adjust the power signal level by step within certain frequency range without power off, they can also be used to adjust the test system‘s power level as inset attenuators, it is small with high accuracy and high stability etc.
     CHB serial B type Key-press Step Attenuators‘ Average Power 2W-10W, Frequency Range from DC-2.5, Attenuation Value 0-90dB by 0.1dB/ 1dB/ 10dB step.
II.Application Area
     Include Communication、3G、Digital Transmission、Radar、Military、Broadcast & Television、science & Research Department etc.
III.Specifications
1、Nominal Impedance：50?
2、Connector Type：N；SMA
3、Temperature Range：According to National Standard GB6587.2-86
      Operation：         -10°C～+50°C
      Non-operation：-40°C～+70°C
4、Physical Dimensions：167×40×24mm
5、Weight：250g
IV.Operation Instructions
1、Operating Method: Connect the input and output ports of Attenuator separately to the corresponding connectors and put it into transmission circuit to use.
2、Note:
(1)   Input Power could not be higher than the Attenuator‘s nominal power which may cause damage of Attenuator.
(2)   Prevent Attenuator from intense collision which may cause damage of Attenuator.
3、Clean the input and output ports with absolute alcohol periodically to ensure good contact in operation.

Adjustable Attenuators

50R-019-SMA

High Accuracy Rotary Attenuator
SMA Connectors
Frequency Range: DC-2200 MHz
Impedance: 50 Ohms nominal
Attenuation Range: 0-10 dB in 1 dB steps

50R-029-BNC

High Accuracy Rotary Attenuator
BNC Connections
Frequency Range: DC-2200 MHz
Impedance: 50 Ohms nominal
Attenuation Range: 0-70 dB in 10 dB steps

50R-029-SMA

High Accuracy Rotary Attenuator
SMA Connectors
Frequency Range: DC-2200 MHz
Impedance: 50 Ohms nominal
Attenuation Range: 0-70 dB in 10 dB steps

High Accuracy Rotary Attenuator
BNC Connections
Frequency Range: DC-2200 MHz
Impedance: 50 Ohms nominal
Attenuation Range: 0-10 dB in 1 dB steps

50R-019-BNC

Dual Rotary Attenuator
Connectors: N, SMA, BNC available on-line
Frequency Range: DC-2000MHz
 Impedance: 50 Ohms nominal
 Attenuation Range: 0-11 dB in 0.1 dB Steps

Programmable Attenuator:

EPA-1200A

Description :
DC-12GHZ
Application for All Wlan band
Bluetooth 2.4GHz
IEEE 802.11 a/b/g/h/i 2.4~5.825GHz
IEEE 802.15.3a (UWB) 3.1~10.6GHz
IEEE 802.16 a/e 2~11GHz
Command Code is the same as HP11713A
Can Upgrade 0.5dB and Remote 6 Bit I/O
example : 1x2 1x4 switch up to 6 unit
Easy Manual Operator and Remote Control

EPA-1200E
DC-12GHZ

EPA-1200E

Application for All Wlan Band
Bluetooth 2.4GHz
IEEE 802.11a/b/g/h/i 2.4~5.825GHz
IEEE 802.15.3a (UWB) 3.1~10.6GHz
IEEE 802.16a/e 2~11GHz
Easy Manual Operator and Remote Control